机器翻译正文由机器翻译自项目原始文档（英文），排版经程序统一处理，可能存在偏差，请以原项目仓库为准。

快速开始

注意： PyPI 包 blender-mcp 现在为 mcp-for-blender。现有设置仍然可用 — uvx blender-mcp 仍然运行服务器，无需更改配置。新安装应使用 mcp-for-blender。
更改内容及原因

三步：安装 uv，将您的 MCP 客户端指向服务器，安装 Blender 插件。

1. 安装 uv

# macOS
brew install uv

# Linux
curl -LsSf https://astral.sh/uv/install.sh | sh

# Windows
powershell -c "irm https://astral.sh/uv/install.ps1 | iex"

警告： 在安装 uv 之前不要继续操作。请使用官方安装程序——不要使用 pip install uv 。

2. 将 MCP 服务器添加到您的客户端

{
    "mcpServers": {
        "blender": {
            "command": "uvx",
            "args": ["mcp-for-blender"]
        }
    }
}

克劳德 MCP 添加 Blender UVX MCP-for-Blender

法典 mcp 添加 blender -- uvx mcp-for-blender

3. 安装 Blender 插件

uvx mcp-for-blender install-addon

然后在 Blender 中：编辑 → 首选项 → 插件 → 启用 界面：MCP for Blender。

4. 连接

在 Blender 的 3D 视图中，按 N → 打开 MCP for Blender 标签 → 点击 启动 MCP 服务器。就是这样 — 可以让 Claude 构建一些东西。

注意： 只运行一个 MCP 服务器实例（要么是 Cursor，要么是 Claude Desktop），不能同时运行两个。

功能

组件

该系统由两个主要组件组成：

1. Blender 插件（ addon.py ）——一个在 Blender 中创建套接字服务器以接收和执行命令的 Blender 插件
2. MCP 服务器（ src/blender_mcp/server.py ）——一个实现模型上下文协议的 Python 服务器，并连接到 Blender 插件

安装

前提条件

• Blender 3.0 或更高版本
• Python 3.10 或更高版本
• uv 包管理器

使用 brew 安装 uv

powershell -c "irm https://astral.sh/uv/install.ps1 | iex"

$localBin = "$env:USERPROFILE\.local\bin"
$userPath = [Environment]::GetEnvironmentVariable("Path", "User")
[Environment]::SetEnvironmentVariable("Path", "$userPath;$localBin", "User")

curl -LsSf https://astral.sh/uv/install.sh | sh

Warning: Do not proceed before installing uv.

Make your client find uvx

MCP clients started from a GUI (Claude Desktop, Cursor, VS Code from the Dock/Start menu) do not inherit your terminal's PATH, so a bare "command": "uvx" can fail with spawn uvx ENOENT even though uvx works in your terminal. If that happens:

• Find uvx's full path — which uvx (macOS/Linux) or where uvx (Windows) — and use it as "command", e.g. /opt/homebrew/bin/uvx or C:\Users\<you>\.local\bin\uvx.exe.
• On Windows you can instead wrap it: "command": "cmd", "args": ["/c", "uvx", "mcp-for-blender"].
• After any PATH or config change, fully quit and relaunch the client (Windows: quit from the system tray, not just the window; macOS: Cmd+Q).

Pin the Python version

Avoid conda / pyenv / version conflicts.

uv chooses which Python runs the server. On machines with conda (auto-activated base), pyenv, or asdf — or with a newer CPython release that some dependencies do not have wheels for yet — uv can grab an interpreter that makes installation fail. Pin Python 3.11 and prefer uv-managed interpreters to avoid using whatever is on your PATH:

{
    "mcpServers": {
        "blender": {
            "command": "uvx",
            "args": ["--python", "3.11", "mcp-for-blender"],
            "env": { "UV_PYTHON_PREFERENCE": "only-managed" }
        }
    }
}

--python 3.11 still satisfies this package's requires-python >=3.10, and UV_PYTHON_PREFERENCE=only-managed keeps uv from selecting conda, pyenv, asdf, or system Python first. (The repo's .python-version is only a hint for contributors and does not affect uvx.)

If a previous failed attempt keeps replaying after a fix, clear the cache:

uv cache clean mcp-for-blender blender-mcp && uvx --refresh mcp-for-blender

Install without uv

On locked-down machines you can skip uvx entirely with pipx, then point your client at the installed command:

pipx install mcp-for-blender
pipx ensurepath          # then restart your shell / client

Use the resulting absolute path as "command" (find it with which mcp-for-blender / where mcp-for-blender) and omit args.

Run with Docker

You can run the MCP server in a container instead of installing it. Blender itself still runs on your machine — the container only hosts the MCP server, which connects out to the Blender addon.

Build the image from the repo root:

docker build -t mcp-for-blender .

Then point your MCP client at it (the -i flag is required — the server talks to the client over stdin/stdout):

{
    "mcpServers": {
        "blender": {
            "command": "docker",
            "args": ["run", "-i", "--rm", "mcp-for-blender"]
        }
    }
}

The image defaults to BLENDER_HOST=host.docker.internal, which reaches the host's Blender out of the box with Docker Desktop on macOS and Windows.

On Linux, host.docker.internal doesn't exist and the addon only listens on localhost, so use host networking instead:

{
    "mcpServers": {
        "blender": {
            "command": "docker",
            "args": ["run", "-i", "--rm", "--network=host", "-e", "BLENDER_HOST=localhost", "mcp-for-blender"]
        }
    }
}

To enable safe mode in the container, add "-e", "BLENDER_MCP_SAFE_MODE=1" to args.

Environment Variables

The following environment variables can be used to configure the Blender connection:

Example:

export BLENDER_HOST='host.docker.internal'
export BLENDER_PORT=9876

You can also pass the connection as CLI flags, which take precedence over the environment variables. This is handy for running several Blender instances side by side, since each MCP client entry can point at a different port with plain arguments instead of env vars:

uvx mcp-for-blender --port 9877

In an MCP client config that means a second entry differing only in args:

{
  "mcpServers": {
    "blender": { "command": "uvx", "args": ["mcp-for-blender"] },
    "blender-b": { "command": "uvx", "args": ["mcp-for-blender", "--port", "9877"] }
  }
}

Each instance needs its own port set in the Blender addon panel to match.

Note: the addon's socket server has no authentication or encryption, so
anyone who can reach that port can run Python inside Blender. Keep it on
localhost unless you are on a trusted network, and prefer an SSH tunnel over
pointing --host/BLENDER_HOST at a remote machine directly.

Safe mode

By default, the AI can run any Python code in Blender. Set BLENDER_MCP_SAFE_MODE=1 to check every script before it runs and block risky code — things like reading or writing files directly, running other programs, accessing the network, or installing code that keeps running after the script ends. Normal Blender work (modeling, materials, rendering, saving, import/export) still works. Blocked scripts are sent back to the AI with the reason, so it can try again with a corrected version.

MCP 客户端设置

Claude for Desktop

Watch the setup instruction video (assuming you have already installed uv)

Go to Claude → Settings → Developer → Edit Config → claude_desktop_config.json and include the following:

{
    "mcpServers": {
        "blender": {
            "command": "uvx",
            "args": [
                "mcp-for-blender"
            ]
        }
    }
}

claude mcp add blender uvx mcp-for-blender

Codex

The Codex CLI, desktop app, and IDE extension all share the same config file (~/.codex/config.toml), so setting the server up once covers all three.

Register the server with the Codex CLI:

codex mcp add blender -- uvx mcp-for-blender

Or add it by hand to ~/.codex/config.toml (or $CODEX_HOME/config.toml):

[mcp_servers.blender]
command = "uvx"
args = ["mcp-for-blender"]

Or in the Codex desktop app: Settings → MCP servers → Add server → name it blender, pick STDIO, enter uvx mcp-for-blender as the command, then Save and restart. If the app can't find uvx, use its full path instead — see Make your client find uvx.

Check it registered with codex mcp list — the blender server should show as enabled. The tools become available the next time you start Codex.

To set environment variables (e.g. a non-default Blender host/port), pass --env KEY=VALUE flags to codex mcp add, or add them in the config file:

[mcp_servers.blender]
command = "uvx"
args = ["mcp-for-blender"]
env = { BLENDER_HOST = "localhost", BLENDER_PORT = "9876" }

Cursor

macOS — go to Settings → MCP and paste the following:

• To use as a global server, use the "add new global MCP server" button and paste
• To use as a project-specific server, create .cursor/mcp.json in the root of the project and paste

{
    "mcpServers": {
        "blender": {
            "command": "uvx",
            "args": [
                "mcp-for-blender"
            ]
        }
    }
}

Windows — go to Settings → MCP → Add Server, add a new server with the following settings:

{
    "mcpServers": {
        "blender": {
            "command": "cmd",
            "args": [
                "/c",
                "uvx",
                "mcp-for-blender"
            ]
        }
    }
}

Cursor setup video

Note: Only run one instance of the MCP server (either on Cursor or Claude Desktop), not both.

Visual Studio Code

Prerequisites: Make sure you have Visual Studio Code installed before proceeding.

OpenCode

{
  "mcp": {
    "blender-mcp": {
      "type": "local",
      "command": ["uvx", "mcp-for-blender"],
      "enabled": true,
      "environment": {
        "BLENDER_HOST": "localhost",
        "BLENDER_PORT": "9876"
      }
    }
  }
}

Antigravity

{
  "mcpServers": {
    "blender-mcp": {
      "command": "uvx",
      "args": ["mcp-for-blender"],
      "env": {
        "BLENDER_HOST": "localhost",
        "BLENDER_PORT": "9876"
      }
    }
  }
}

安装 Blender 插件

1. Recommended — from a terminal, run:

uvx mcp-for-blender install-addon

This copies the addon into your Blender addons folder as blender_mcp.py. It prints where it wrote to, and keeps a .bak of any file it replaces.

Optional: uvx mcp-for-blender addon-paths lists detected Blender addons folders. Override the destination with BLENDERMCP_ADDONS_DIR=/path/to/scripts/addons.

2. Open Blender

3. Go to Edit → Preferences → Add-ons

4. Enable Interface: MCP for Blender (search "MCP for Blender"). If it doesn't appear yet, click Install… and select the copied blender_mcp.py / addon.py, or restart Blender.

5. Manual alternative — if the command above can't find your Blender install, or you prefer doing it by hand: download addon.py from this repo → in Blender, Edit → Preferences → Add-ons → Install… → select the downloaded addon.py → enable it.

Then open the MCP for Blender tab in Blender's sidebar (press N in the 3D viewport) and click Start MCP Server. See Starting the Connection below.

升级（现有用户）

For newcomers, go straight to Quickstart. For existing users, see below.

1. Update the addon file by running:

uvx mcp-for-blender install-addon
uvx mcp-for-blender addon-paths   # optional: list detected Blender addons folders

2. In Blender: Preferences → Add-ons → disable and re-enable Interface: MCP for Blender (or restart Blender), then click Start MCP Server again.

3. Delete the MCP server from Claude and add it back again if the server package itself needs a refresh.

Note: the MCP server never modifies your Blender addon files on its own. When it starts, it checks whether the installed addon is behind the bundled copy and logs how to update; install-addon is what actually writes, and it keeps a .bak of the file it replaces. Trajectory capture still works on older loaded addons via an execute_code fallback.

使用方法

Starting the Connection

1. In Blender, go to the 3D View sidebar (press N if not visible)
2. Find the MCP for Blender tab
3. Turn on the checkboxes you'd like to use (see more under Capabilities below)
4. Click Connect to Claude
5. Make sure the MCP server is running in your terminal

Using with Claude

Once the config file has been set on Claude, and the addon is running on Blender, you will see a hammer icon with tools for MCP for Blender.

Capabilities

• Get scene and object information
• Create, delete and modify shapes
• Apply or create materials for objects
• Execute any Python code in Blender
• Export the scene, the selection or named objects to GLB/FBX for other applications (export_scene)
• Look up node schemas and the bpy API reference instead of guessing socket order or enum names
• Download the right models, assets and HDRIs through Poly Haven
• Search and download models from Sketchfab
• Search and download low-poly models from Poly Pizza
• AI generated 3D models through Hyper3D Rodin and Hunyuan3D

Hunyuan3D on Tencent Cloud (Official API mode)

Which Tencent Cloud service the addon must call depends on where your account lives:

International credentials sent to the mainland endpoint fail with AuthFailure.SignatureFailure or ResourceUnavailable, so tick the toggle when your SecretId/SecretKey come from tencentcloud.com. The toggle sits under Tencent Hunyuan 3D → Official API in the sidebar.

Poly Pizza

Poly Pizza hosts roughly 10,600 free low-poly models, including the rescued Google Poly archive. It is the best source for stylised game assets: every model is a single self-contained .glb, and the geometry is far lighter than Sketchfab's.

1. Get a free API key at poly.pizza/settings/api
2. In the 3D View sidebar, tick Use assets from Poly Pizza
3. Paste the key into the API Key field that appears (or store it permanently under Edit → Preferences → Add-ons → MCP for Blender)

Worked example:

"Search Poly Pizza for a low-poly chair under a CC0 licence and import one at 1 metre tall"

Claude calls search_polypizza_models(query="chair", licence="CC0"), which returns each match with its licence and triangle count, then download_polypizza_model(model_id="...", normalize_size=True, target_size=1.0).

You can also filter by category ("Animals", "Furniture & Decor", "Transport", "Nature", "Buildings", "People & Characters", "Food & Drink", "Weapons", "Clutter", "Objects", "Scenes & Levels", "Other") or ask for animated models only.

Attribution: about 69% of the Poly Pizza catalogue is CC-BY, which requires you to credit the creator wherever the model appears. On import, the ready-formatted credit line is written onto each imported root object as the custom property polypizza_attribution (alongside polypizza_id and polypizza_licence), so it is saved into your .blend and survives the session. Filter with licence="CC0" if you would rather use models that need no credit.

Example Commands

Here are some examples of what you can ask Claude to do:

持久 API 凭证

MCP for Blender supports persistent credentials via Blender Add-on Preferences:

Edit → Preferences → Add-ons → MCP for Blender

You can store these values there so they survive Blender restarts:

• Sketchfab API Key
• Poly Pizza API Key
• Hyper3D API Key
• Hunyuan3D SecretId / SecretKey
• Hunyuan3D API URL

For headless setups or CI, credentials can also be injected by environment variables:

故障排除

技术细节

Communication Protocol

The system uses a simple JSON-based protocol over TCP sockets:

• Commands are sent as JSON objects with a type and optional params
• Responses are JSON objects with a status and result or message

限制与安全考虑

Warning: The execute_blender_code tool allows running arbitrary Python code in Blender, which can be powerful but potentially dangerous. Use with caution in production environments. ALWAYS save your work before using it.

• Poly Haven requires downloading models, textures, and HDRI images. If you do not want to use it, please turn it off in the checkbox in Blender.
• Complex operations might need to be broken down into smaller steps.

遥测控制

MCP for Blender collects anonymous usage data to help improve the tool. Telemetry consent is on by default, and you can turn it off in two ways:

1. In Blender — go to Edit → Preferences → Add-ons → MCP for Blender and uncheck the telemetry consent checkbox.

• With consent (checked, the default): view the TnC for more details on data collected.

2. Environment Variable — completely disable all telemetry by running:

DISABLE_TELEMETRY=true uvx mcp-for-blender

Or add it to your MCP config:

{
    "mcpServers": {
        "blender": {
            "command": "uvx",
            "args": ["mcp-for-blender"],
            "env": {
                "DISABLE_TELEMETRY": "true"
            }
        }
    }
}

Telemetry data is not linked to your name or account. It may be used to improve MCP for Blender, for research, and to train AI models.

Full detail on what is collected, and the license you grant by leaving telemetry on, is in TERMS_AND_CONDITIONS.md.

反馈

We are actively looking for feedback on MCP for Blender. If you have thoughts, share them here.

If you have more detailed feedback, you can schedule a call with us here — we will credit you in the project.

Join the Community

Give feedback, get inspired, and build on top of the MCP: Discord

贡献

Contributions are welcome! Please feel free to submit a Pull Request.

免责声明

This is a third-party integration and not made by Blender. Made by Siddharth.

星标历史